5 Ways To Identify The Office Chair Quality

It is estimated that at least 8 hours a day for the office workers is in the office chairs, and it is even longer for the software development engineers. Under such circumstance, the office chair quality has a great impact on the health and safety of users.

In this article, we’re gonna tell you the criteria for determining the office chair quality and the 5 ways to identify the office chair quality.

Criteria for determining the quality of office chairs

When it comes to the quality of office chairs, it is usually measured and determined by these three points. They are.

1. Product stability

2. Caster reciprocal wear degree

3. Formaldehyde emission

Product stability

Stability project is an important indicator to assess the quality of office chairs are qualified. When the user tilts forward, tilts backward or sits sideways, office chairs with unqualified stability can easily tip over. This may cause injury to consumers and pose a safety hazard.

As another common type of office chair, swivel chairs may encounter more quality issues, from the casters to the base to the gas cylinder that adjusts the lift. For example, the five-star base is an important part of the swivel chair. If its quality is not up to standard, it can be easily damaged during use, which can cause consumers to fall and cause personal injury.

If the construction and sealing of the air cylinder is not tight enough, it will lead to air leakage, which further leads to failure of the lift and affects the use of the chair.

Caster reciprocation wear level

In addition to the five-star base, casters are another integral part of the swivel office chair. The quality of the casters is related to the service life of the office chair.

Some manufacturers may purchase some poor quality raw materials for the casters. The cheap ones may be one or two dollars, while the expensive ones can be five or six, seven or eight, or even ten dollars.

Qualified casters have a wear threshold of at least 100,000 times. While poor quality casters may be broken within 10,000 or 20,000 times. Poor quality casters are prone to severe wear and tear and their plastic load-bearing components are prone to cracking. In such cases, consumers need to replace casters frequently, which leads to poor product experience and poor evaluation.

Formaldehyde Emissions

Formaldehyde is a colorless, irritating gas that has been identified as a Group I carcinogen by the World Health Organization. Long-term exposure to low concentrations of formaldehyde may cause dizziness and fatigue. When formaldehyde concentration is high, it can be strongly irritating and toxic to the nervous system, immune system and liver.

The materials used in office chairs are mainly plastic, plywood, foam, fabric and hardware. The surface of the hardware will also be painted, so all materials have some risk of formaldehyde content.

Seeing this, as an office chair manufacturer or chair parts distributor, do you feel a cool breeze behind you? Are you worried about buying poor quality office chair parts, which could affect your product and corporate reputation? Don’t worry, keep reading and we will show you how to identify the quality and safety of office chairs in order to determine the quality of the office chair parts you buy.

5 ways to identify the quality of office chairs

01. Check the weight-bearing capacity of the backrest

The backrest of the office chair is what we should be concerned about. A good seat backrest should be made of nylon and fiberglass in the right proportion, wear-resistant and tough, not easy to break.

We can sit on the chair first and then lean back to feel its weight-bearing capacity and sturdiness. If you sit up and feel that the backrest is about to break, then the quality of the backrest of such a chair must be very poor. In addition, you can install the armrests to see if the height of the office chair armrests are equal. Armrests of unequal height may be uncomfortable.

02. Check the tilt mechanism and casters

Some chair parts manufacturers may use some inferior materials in the production of chair parts. Therefore, the stability of the office chair assembled with these chair parts must be quite unstable. Adjust the lift system or tilting mechanism of the office chair to see if it is smooth. Sit on the chair and slide it back and forth a few times to check if the casters are smooth.

03. Check the hardware connection

The tightness of the hardware connection is the key to determine the stability of the office chair. If the hardware connection is loose, or some connections may be missing screws, the office chair will be very shaky and may even collapse after a long period of time. In this case, there is a huge safety risk. Therefore, office chair manufacturers must be careful during the assembly process. You can shake the office chair to see if the chair components have been firmly installed.

04. smell

Get close to the office chair and smell it. If you feel a strong irritating smell with uncomfortable symptoms such as watery eyes or an itchy throat, the formaldehyde content may exceed the standard.

05. look at the certificate

The feeling, perception and smell based on the sitting position described above can only ensure the transient stability of the chair. To know whether the quality of the chair is stable in the long term, it must be ensured by testing. The American BIFMA and European CE standards have very sophisticated testing systems for office chairs and chair parts. If the chair parts you buy can pass the relevant test standards and obtain a certificate, then you can guarantee the long-term quality stability of the chair.

Conclusion

Overall, quality chair parts are the guarantee of office chair quality and the foundation of a qualified office chair. Purchasing quality assured chair parts from a reliable office chair parts manufacturer is the best guarantee for your business and the way to achieve long-term growth. We, as an experienced and reputable office chair parts manufacturer, can be the perfect choice for you.